JET 708486 JPT-10DI Dado Insert For Pro Shop Saw

[Shop Now !!!]

Includes JPT-10DI Dado Insert For Pro Shop Saw - 708486[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Micro Jig Handle Bridge for GRR-Ripper Adjustable Push Block

[Shop Now !!!]

Intended for use with the GRR-Ripper Adjustable Push Block (sold separately Rockler #62689).

Micro jig handle bridge provides four contact points to apply more downward pressure across the entire width of the GRR-Ripper body for better control. Also includes replaceable push foot.[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Leecraft CR-2 Sears Older 10-Inch Belt-drive Zero Clearance Table Saw Insert

[Shop Now !!!]

CR-2 is 14-3/8" x 3-3/4" x 3/16" and fits Sears CRAFTSMAN older 10 belt-drive saws including models: 113.29901 113.29903 113.299040 113.29943 113.299142 113.29960.

• Supports work right up to the blade


• Greatly reduced chip-out and splintering


• Elimantes dangerous gap around blade where thin off-cuts can get wedged

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Magswitch Pro Magnetic Table Featherboard 30mm

[Shop Now !!!]

Switchable Magnetic Table Featherboard
Fast easy setup
Precise positioning
Perfect for infeed/outfeed applications
Easily turns magnets on and off and provides powerful control
Lock the featherboard tight with just the twist of a knob
Use for infeed/outfeed - your work stays in one place firmly
Use with table saw fence on left side of blade
Operation: Align the featherboard with the material to be cut. Use one hand to apply pressure and the other to switch the magnets on. Position the featherboard so it doesn't pressure the saw blade. Leave Magswitch off when done.

• Versatile - no miter slot limitation


• Fast accurate positioning


• Cut wider material


• Can be place beyond the miter slot


• Easy on/off operation

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Micro Jig GRR-Ripper Basic 3D Push Block System (GR-100)

[Shop Now !!!]

The GRR-Ripper lets you feed both sides of a workpiece parallel through the saw blade and eliminates bare hand feeding. It's perfect for ripping thin strips safely. It results in a perfectly straight cut and keeps your hands away from the cutting elements. With grooved non-slip pads on bottom and adjustable handle.

• Lets you feed both sides of a workpiece parallel through the saw blade


• Perfect for ripping thin strips safely


• Achieve perfectly straight cuts while protecting your hands


• Grooved non-slip pads on bottom and adjustable handle

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

DEWALT DW7028 Miter Saw Stand Extension Support

[Shop Now !!!]

Includes Miter Saw Stand Extension Support - DW7028

• Extension support supports miter saw stand extension for more rigid support


• Adjustable height from 21-Inch to 37-Inch provides level support on uneven surfaces


• Compatible with dw723 dwx723 and dwx724 miter saw stands

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

MasterGage MP-1 MasterPlate

[Shop Now !!!]

Align calibrate and tune up your table saw to within +/- .001". this double disk ground aluminum late fits 5/8" and 1" arbors. Measuring 6" x 10" it's designed for squaring and aligning your saw blade to the table and unlike saw blades it has zero runout! Precisely measure any angle too!

• The MasterPlate is a solid 6-by-10-by-1/4-Inch thick aluminum "tool makers" quality plate ground flat to within thousandths of an Inch


• The MasterPlate provides a full flat 10-Inch surface parallel to the miter slot and a vertical height of almost 7-Inch perpendicular to the table top


• Fits both 5/8 and 1-Inch diameter arbor shafts


• Set both miter and bevel angles on saws to within minutes of a Degree


• Use the MasterPlate to calibrate and troubleshoot table saws radial arm saws chop saws and sliding compound miter saws

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Bench Dog 10-001 Table Saw Blade-Loc

[Shop Now !!!]

• Blade locking device designed to make blade changes safer and easier


• Protects both hands and expensive saw blades from damage


• Made from plastic that's tough enough to handle the abuse in any shop


• For use with 10-inch table saw blades; helps eliminate the chance of cuts chipped teeth and bent blades


• Made in the USA; weighs 1 pound shipped

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Tool Designs 10230 Power Hands Push Stick

[Shop Now !!!]

• Absorbs vibration


• Powerful Grip


• Made in U.S.A.

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Micro Jig 1/8" Kerf SteelPRO MJ Splitter Kit (Blue)

[Shop Now !!!]

This is a low profile splitter that also serves as a mini feather board for the keeper piece behind the saw blade. Simple exact and extremely effective; cutting results are exceptionally precise and virtually burn free when using the MJ Splitter. Designed to be installed on a zero clearance insert (not included) the MJ Splitter features fool proof installation and a revolutionary concept that provides alignment surfaces of different thicknesses. Also includes the Auto Kerf Keeper a dedicated device that engages automatically if the saw kerf begins to close to reduce tension on the MJ Splitter and the saw blade for safer operation.

• Made of a polycarbonate shell and reinforced with a solid stainless steel core.


• engages automatically if the saw kerf begins to close to reduce tension on the MJ Splitter and the s


• Includes four Splitters to achieve four offsets to the blade four Auto Kerf Keepers.


• Includes installation jig drill bit and detailed instructions.

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

INCRA TSLEGS Table Saw Rail Support Legs

[Shop Now !!!]

Incra Table Saw Rail Support Legs Directly support the rails of the TS-LS Table Saw Fence System adding stability to the entire saw platform

• INCRA Table Saw Rail Support Legs Directly Support the Rails of the TS-LS TS-III and TS-II Systems


• Adding Stability to the Entire Saw Platform

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

BOWL TURNING DVD WITH DEL STUBBS

[Shop Now !!!]

Del Stubbs shows you how to turn beautiful bowls & plates. You can start with dry lumber or green wood you cut yourself. The camera zooms in close to see the careful contact of edge on wood & then moves back so you can study various tool positions grips & stances. You will learn about cutting tool types & modification of standard tools grinding & honing chisels gripping various turning tools mounting bowl blanks & roughing out the shape modifying a standard lathe controlling warp in the third wall of a bowl cutting into end grains & designing bowl forms. Run time:120 min.

• Learn tool positions grips and stances.


• Del teaches you cutting tool types & modification of standard tools.


• You will learn how to grip various turning tools & how to mount bowl blanks.


• He shows you how to control warp & cutting into end grain plus much more.


• Run time: 120 minutes

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Micro Jig GRR-Ripper Advanced 3D Push Block System (GR-200)

[Shop Now !!!]

Far more than an ordinary push block the GR200 is a highly evolved workpiece support system that enables you to safely rip strips as thin as 1/4" resaw rip small or angled pieces short offcuts and more. It applies even pressure to both the main stock and the offcut piece preventing snipe lifting burning and kickback. The high-friction pads cling firmly to any point along the stock enabling the GR200 to easily grip oddly-shaped pieces - great for pattern routing. Unit comes with 1/4" and 1/2" side legs adustable center leg adjustable 1" fence-side spacer for wider stock and a stabilizing accessory plate with balance unit for leveling the unit when cutting narrow pieces and for attaching shop-made fixtures. Also includes comprehensive users manual. Made in USA.

• The GR200 is a highly evolved workpiece support system that enables you to safely rip strips as thin as 1/4''


• It applies even pressure to both the main stock and the offcut piece


• High-friction pads easily grip oddly-shaped pieces


• Unit comes with 1/4'' and 1/2'' side legs adustable center leg adjustable 1'' fence-side spacerand a stabilizing accessory plate with balance unit


• Includes comprehensive users manual

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Woodstock W1400 Push Block Small

[Shop Now !!!]

OPTIONAL ACCESSORY Push block small

• Bright orange color for added safety


• High-impact molded plastic


• Natural rubber friction pad


• Push block dimensions 6" x 3" x 3"


• Protects your hands!

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard

[Shop Now !!!]

• Fixed splitter maintains correct alignment with saw blade at all times


• Tilts with saw arbor for angle cutting


• Easily removed for non-through cutting applications


• Clear see-thru LEXAN split-basket shields


• Universal Switch Mounting Bracket

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Milescraft 3402 PushStick and Depth Gage for Router Tables and Table Saws

[Shop Now !!!]

The Milescraft Model 3402 PushStick is more than a standard push stick. It has been engineered with a tall tilted natural grip handle that gives firm control while providing improved visibility and clearance from the cutting blade or bit. A built in Rear and soft surface base provides secure control of the stock without damage. Included in the package is a depth gauge for measuring marking or locating blades bits and fences. To keep the push stick depth gauge and other table top accessories close at hand a docking station with a rare earth magnetic base has also been included.

• Tall tilted natural grip handle provides a firm grip and improves visibility and clearance from blade/bit


• Rear' and soft surface base provides a secure hold without damaging the stock


• Depth Gage Included - Measure mark and locate blade and bit heights and table offsets in English or Metric


• Docking Station Included to keep PushStick depth gauge and marking pencils close for easy retrieval. Magnetic base helps hold docking station in place on most table saws


• High visibility yellow - Easy to locate in a busy shop

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud Fusion 10" x 40T x 5/8" Thin Kerf Saw Blade

[Shop Now !!!]

The Thin Kerf Fusion tooth design fuses Freuds 30 degrees Hi-ATB tooth with Freuds unique double side grind tooth geometry. The design provides a glass smooth side finish while also giving a flawless top and bottom finish in veneered plywood hardwoods and melamine.

• One Blade Does It All-Crosscuts & Rips


• Freud engineers have discovered the ultimate combination of fused tooth grind geometry


• A special carbide blend and superior carbide brazing


• Whether you're ripping or crosscutting a Premier Fusion blade will tackle any project.


• Non-stick Perma-SHIELD coating reduces gumming rusting and corrosion

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]