Deflector / Connector For Micro Jig GRR-Ripper

[Shop Now !!!]

The MJ Deflector+Connector keeps flying wood chips at bay or acts as an extended blade guard for the GRR-Ripper. This useful accessory is great when working with larger stock to connect two GRR-Rippers together. A great addition to the woodshop Control System that never compromises your safety or the quality of your work.

• Deflector/Connector requires the Handle Bridge Set

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Slick Strips 3/4" Width 1/32" Thick

[Shop Now !!!]

Slick Strips reduce friction to the point where almost everything moves like its mounted on ball bearings! This special UHMW (Ultra High Molecular Weight) adhesive-backed flexible plastic film has a low coefficient of friction and a high abrasion resistance that surpasses even Teflon. The 3/4" width is perfect for renewing the smooth run of worn wooden drawers.10.5 rolls are easily cut to length.Slick strips are 1/32" thick.

• 3/4" Width 1/32" Thick


• 10.5' rolls


• Easily cut to length

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Micro Jig Thin Kerf SteelPRO MJ Splitter Kit (Orange)

[Shop Now !!!]

This is a low profile splitter that also serves as a mini feather board for the keeper piece behind the saw blade. Simple exact and extremely effective; cutting results are exceptionally precise and virtually burn free when using the MJ Splitter. Designed to be installed on a zero clearance insert (not included) the MJ Splitter features fool proof installation and a revolutionary concept that provides alignment surfaces of different thicknesses. Also includes the Auto Kerf Keeper a dedicated device that engages automatically if the saw kerf begins to close to reduce tension on the MJ Splitter and the saw blade for safer operation.

• Made of a polycarbonate shell and reinforced with a solid stainless steel core.


• Includes four Splitters to achieve four offsets to the blade four Auto Kerf Keepers.


• Includes installation jig drill bit and detailed instructions.

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Magswitch Mag-Jig 30mm

[Shop Now !!!]

Avoid the hassles of creative clamping while trying to secure jigs on a work table. MagJig gives you flexibility to mount anywhere on a steel surface such as your table saw jointer shaper bandsaw drill press or stationary sander.

• 30mm Magswitch


• 40mm hole required

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Slick Strip 3/4" x 9' Roll

[Shop Now !!!]

This special plastic film creates a frictionless surface area for your stock to glide against. These self adhesive strips can be cut to desired size with a utility knife or scissors. Highly abrasion resistant Slick Strips are ideal for fences on table saws router tables shapers and radial arm saws. Strips also provide a slippery surface area on router bases and other power tools. Simply peel off strips and apply to clean dry surface area. Made in USA.

• This plastic film creates a frictionless surface area for your stock to glide against.


• These self adhesive strips can be cut to desired size with a utility knife or scissors.


• Highly abrasion resistant.


• Strips provide a slippery surface area on router bases and other power tools.


• Slick Strips are ideal for fences on table saws router tables shapers and radial arm saws.

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

HTC TS-9112 Tool Saver 72-by-112-Inch Jumbo Machine Cover

[Shop Now !!!]

Condensation and the rust it brings on are all too often the results of ordinary machine covers. This HTC cover is of a strong durable cotton sheeting that is skip-coated with a special plastisol. The resulting cover is water resistant but breathes so condensation doesnt collect. The covers have the hems rolled around the entire perimeter with a rubberized magnet sewn into each corner. These durable silver-colored protectors are useful around the house but are sized for woodworkers.

• Large Machine Cover protects against rust harmful moisture dust and other workshop elements


• Made of rugged cotton sheeting with a special plastisol


• Fabric roll-hemmed around the entire perimeter


• Rubberized magnet sewn to each corner

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

43" Uni-t-fence Table SAW Fence By Peachtree Woodworking - PW1113

[Shop Now !!!]

The Uni-T-Fence is a heavy duty aluminum extrusion up-grade fence foe the Delta Uni-fence Table Saw System. The extruded square design allows you to attach or even build many different types of jigs and fixtures. Comes in 36" and 43" each sold separately.

• 43" Heavy duty aluminum extrusion up-grade fence for the Delta Unifence Table Saw Guide System


• Replaces the Stock Delta Fence which mounts to their saw fence guide.


• You must own the Delta UniFence to use this product.


• Simple mounting - slide the stock fence off and slide the Uni-T-Fence on.


• No holes to drill

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746

[Shop Now !!!]

LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. These 1/2" thick inserts are precision machined from a nearly frictionless melamine faced high density phenolic laminate.Offer durability and flatness unobtainable from cheaper plastic inserts.Features like top mounted set screws for precise leveling front/side adjustment screws for perfect side to side and front to rear fit and a rear safety pin that keeps the rear of the insert in place make this the best insert we have ever seen.Sheet stock material (1/2" x 11" x 15") is perfect for creating your own custom jigs and fixtures. Complete with instructions. Insert surface colors may vary.

• Table saw insert for eWalt DW744 and DW746


• Significantly reduces saw noise dust chip-out and splintering


• Constructed of high-density phenolic laminate with a bonded-melamine surface


• User-friendly with leveling and lateral adjustment screws rear anti-life pin and precut blade bottom pocket


• Measures 13-5/8-by-3-3/4 inches (LxW)

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)

[Shop Now !!!]

LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. This 1/2" thick insert is precision machined from a nearly frictionless melamine faced high density phenolic laminate. It offers durability and flatness unobtainable from cheaper plastic inserts. Features like top mounted set screws for precise leveling front/side adjustment screws for perfect side to side and front to rear fit and a rear safety pin that keeps the rear of the insert in place make this the best insert we have ever seen. Sheet stock material (1/2" x 11" x 15") is perfect for creating your own custom jigs and fixtures. Craftsman insert measures 14" x 3-3/4" and fits most new 10" belt drive models. (Check the opening of your Sears saw before ordering). Complete with instructions. Insert surface colors may vary.

• Supports work right up to the blade


• Reduced chip-out and splintering


• Reduces saw noise


• Kerf serves as stock alignment guide

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

DELTA 34-672 Dado Head Table Insert for 10-Inch Table Saw

[Shop Now !!!]

[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

HTC TS-9056 Tool Saver Machine Cover Medium (36-Inch x 56-Inch)

Condensation and the rust it brings on are all too often the results of ordinary machine covers. This HTC cover is of a strong durable cotton sheeting that is skip-coated with a special plastisol. The resulting cover is water resistant but breathes so condensation doesnt collect. The covers have the hems rolled around the entire perimeter with a rubberized magnet sewn into each corner. These durable silver-colored protectors are useful around the house but are sized for woodworkers.

• Measures 36 by 36 inches ideal for scrollsaws short bed jointers


• Rugged cotton sheeting with plastisol coating


• Breathable yet water resistant


• Roll hem with rubberized magnets on each corner

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

DELTA 34-154 Standard Table Insert for Right Tilt UniSaws and Contractors Saws

[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Power Twist V-Belt

Reduce vibration in any of your belt driven machines with the Power Twist Link Belt! Common V-belts develop a "memory" and retain their non-operating shape causing annoying and unnecessary machine vibration. However these specially engineered link belts do not develop a "memory" but retain their flexibility for smooth operation. Link Belt is 1/2" wide. Easily adjustable. Prepackaged 4 length. Includes instructions for use.

• Reduces Vibration


• Replaces 1/2" V-Belt


• 4' Length

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

DEWALT DW7441 Side and Outfeed Support

• Provides added material support for large work pieces


• Sliding support rods store under table top


• Robust all-metal construction


• Includes both out feed support and side support systems


• Includes systems for outfeed support and sidefeed support

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Woodhaven 4555 Box Joint Jig

This jig is the easiest way to make box joints because the work moves over the jig. That means there's less chance for error and better results than jigs that require moving both the jig & the work for each cut.

• Cuts any box joint between 1/8" to 13/16".


• Works on a table saw or router table. Attaches to any miter gauge (not included).


• Includes a 24" aluminum Ultra Track with bit/blade cutout and replaceable sub-fences.


• Adjustable pins prevent part slippage.


• Lifetime guarantee against defects in material or workmanship. Made in the USA!

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Grr-ripper Deluxe Supreme System

The GRR-Ripper(TM) GR-200 Advanced System is a revolutionary precision woodworking hand pushing tool composed of different adjustable/detachable components that are used on the table saw router table shaper & jointer. Great safety protection to users! Win coupled with the instructional video and the handle bridges youu have the best table safety system aavailable.

• Includes; 2 GR-200 GRR-Rippers & GRR-Ripper DVD & 2 Handle Bridges


• Precision woodworking hand pushing tool with adjustable/detachable components


• Utilizes multiple grooved non-slip pads for strong gripping & holding power


• Pushes & holds the work piece as the saw blade passes through either right or left tunnel


• The handle center leg & balance support are all fully adjustable the handle bridge improves comfort

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

ACC-RIDGID 8" DADO INSERT 3/8" RYOBI - RIDGID AC1040

Ridgid Dado Molding Head Insert Fits 6" and 8" Dado Sets for Table saws TS3650 TS2400LS

• Ryobi

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw

LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. These 1/2" thick inserts are precision machined from a nearly frictionless melamine faced high density phenolic laminate.Offer durability and flatness unobtainable from cheaper plastic inserts.Features like top mounted set screws for precise leveling front/side adjustment screws for perfect side to side and front to rear fit and a rear safety pin that keeps the rear of the insert in place make this the best insert we have ever seen.Sheet stock material (1/2" x 11" x 15") is perfect for creating your own custom jigs and fixtures. Complete with instructions. Insert surface colors may vary.

• Table saw insert supports work right up to the blade for smooth more precise cuts


• Offers superior rigidity flatness durability and low friction; reduces chip-out and splintering


• Made from high-density phenolic laminate with a bonded-melamine surface


• Includes leveling screws side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts


• Leecraft's lifetime warranty; designed for Delta table saw with carbide-tipped blades only

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Bosch TS1007 Dado Insert

For use w/ stack dado/rabbet cutters. - Specifications: Part Number: TS1007 Used on Model No. : 4000 Sales Pack Quantity: 1.

• Dado insert for use with stack dado and rabbet cutters


• Accommodates up to 3/4-inch lumber


• Plastic construction


• Includes 1 insert; blade and saw not included


• 3-13/16-inches; 1-year warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Bosch TS1002 Table Saw Rear Outfeed Support Extension

Table saw rear outfeed support extension. Extends 18-inches and stores flush to table; extends working depth of Bosch 4000 10-inch table saw. Hardened metal construction; aluminum mounts. Includes 1 table saw extension; table saw not included. 1-year warranty

• Table saw rear outfeed support extension


• Extends 18-inches and stores flush to table; extends working depth of Bosch 4000 10-inch table saw


• Hardened metal construction; aluminum mounts


• Includes 1 table saw extension; table saw not included


• 1-year warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Bosch TS1003 Table Saw Left Side Support Extension

This Bosch TS1003 Left Side Support Extension increase the width of your table to 52-inches when used with the Bosch 4000 10-inch Worksite Table Saw.

• Table saw left-side support extension for Bosch 4000 10-inch worksite table saw


• Extends table additional 12-inches for working with wide and long-pieces; stores flush when not in use


• Aluminum construction; 5mm hex wrench and needle nose pliers needed for installation


• Includes 1 table extension; table saw not included


• 4.4-pounds; 1-year warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Bench Dog 10-035 Bench Cookie Work Grippers 4-Pack

The Bench Dog 10-035 Bench Cookies - 4 Pack work grippers are versatile non-slip bench pads that lift grip and protect your work.  Use the Bench Dog 10-035 Bench Cookie to elevate your work and provide clearance for routing or finishing jobs. Sold in a convenient pack of four these cookies are a must-have addition to any workshop.

Features:

• High-friction rubber surfaces and durable cores prevent projects from slipping as you work
• Assemble projects on a stable non-slip base
• Raise up workpieces for easy edge finishing
• Support projects without leaving marks

What's In The Box:

• Bench Dog 10-035 Bench Cookies - 4 Pack

• Bench Cookies give you the freedom and ability to: Rout sand cut and carve without using clamps


• Raise up workpieces for easy edge finishing


• Support projects without leaving marks


• Assemble projects on a stable non-slip base

More detail ...

Grr-ripper Deluxe Supreme System

• Includes; 2 GR-200 GRR-Rippers & GRR-Ripper DVD & 2 Handle Bridges
• Precision woodworking hand pushing tool with adjustable/detachable components
• Utilizes multiple grooved non-slip pads for strong gripping & holding power
• Pushes & holds the work piece as the saw blade passes through either right or left tunnel
• The handle, center leg & balance support are all fully adjustable the handle bridge improves comfort